China Good quality 15kw 20 HP Industrial Belt Driven Screw Air Compressor air compressor CHINAMFG freight

Product Description

Integrated air tank air dryer screw air compressor
Belt driven type Screw Air Compressor Specifications
* Genuine belt to meet the demand of heavy-duty, long life and high reliability.
* Convenient belt tensioning device makes the maintenance easy,and the transmisstion high-efficiency is ensured.
* Provide the flexibility for the customers easily modify the working pressure if a change becomes necessary.
* Low operation cost
* Energy saving

 
KP-LB Belt Drive Integrated Type Screw Air Compressor with air tank air dryer 
Power range: 20hp ~ 600hp
Pressure: 7-13 Bar

* 7bar/8bar/10bar/12.5bar working pressure(discharge pressure) for your selection (for more lower pressure 4bar or 6bar, please send your inquiry )
* Intelligent microcomputer control system, controller has the remind & record function, show the compressor operation situation clearly
* Superior components, low maintenance cost
* Germany OPTI belt, easy for replace, and ensure the product quality
* Oversize air-end, low rpm, no overheat problem
* IP54/IP55 high quality motor, CHINAMFG bearing, Class F level insulation; Class BTemperature rise; 
* Discharge temperature= Ambient temperature+15ºC, with cooling/ventilation system tailor made to the same local hot-humid climatic condition, NO OVERHEATING ON CONTINUOUS 100% LOAD IS GUARANTEED!
* Top door is locking design, easy to open to clean the cooler and fan 
*Compressor is filled with lubrication oil before delivering, you can operate it after installed and powered on. Once it run 500hours to change the new air filter and oil filter was set for first maintenance, then normally change them with 2000-3000hours for once maintenance replacing new one.
* Phase reversal protection, current overload protection, pressure protection, overheat protection

Model No. Motor Power
(kw)
Power(Hp) Air delivery(m³/mim)  Working pressure(bar) Lubricant Oil  (L) Outlet Pipe Dia L*W*H(mm) N.W(KG)
KP-LD-22 22 30 3.5 7 15 G1″ 1300×850×1220 550
3.3 8
3 10
2.6 13
KP-LD-30 30 40 5.2 7 20 G1-1/2″ 1550×950×1380 700
5.0 8
4.5 10
3.8 13
KP-LD-37 37 50 6.5 7 20 G1-1/2″ 1550×950×1380 800
6.2 8
5.7 10
4.8 13
KP-LD-45 45 60 8.0 7 20 G1-1/2″ 1550×950×1380 960
7.5 8
6.9 10
6.0 13
KP-LD-55 55 75 10.3 7 30 G2″ 1700×1100×1520 1600
9.6 8
8.7 10
7.5 13
KP-LD-75 75 100 13.5 7 35 G2″ 2100×1200×1650 1900
12.5 8
11.2 10
10.0 13
KP-LD-90 90 125 16.3 7 40 DN50 2200×1250×1650 2100
15.9 8
14.0 10
12.2 13
KP-LD-110 110 150 21.0 7 50 DN65 2500×1500×1950 3400
20.0 8
17.0 10
14.8 13
KP-LD-132 132 180 23.5 7 50 DN65 2500×1500×1950 3400
22.5 8
21.0 10
18.0 13
KP-LD-160 160 220 28.0 7 60 DN80 2600×1500×1950 4000
26.5 8
24.5 10
20.3 13
KP-LD-185 185 250 32.0 7 60 DN80 2800×1560×1920 4000
30.0 8
27.8 10
24.5 13
KP-LD-200 200 280 34.3 7 60 DN80 2800×1700×1950 4200
32.9 8
30.2 10
27.2 13
KP-LD-220 220 300 36.0 7 100 DN100 3360×2000×2000 4500
34.2 8
30.2 10
27.5 13
KP-LD-250 250 340 43.5 7 100 DN100 3360×2000×2000 4900
41.8 8
38.0 10
34.5 13
KP-LD-315 315 400 57.6 7 220 DN125 4200×2250×2275 5700
54.5 8
50 10
43.4 13
KPLD-355 355 480 64.5 7 220 DN125 4200×2250×2275 6200
62.2 8
56.0 10
48.6 13

*According to the standard of GB19153-2009     *Compressor Stage: CHINAMFG Compression
*Standard Power Supply: 380V/50Hz/3ph           *Exhaust Temperature: Ambient Temperature +15ºC
*Configurated normal temperature type Air dryer,with Dew Point range: 3-10ºC;
*Please contact us for any specification that is not within the above mentioned standard.
 

Welcome to join us !
We Consider Our Customers as Our Friends and Families, and We do Believe in the CHINAMFG Situation for Building up Long-Term Relationship. 
• Innovation
    Provide innovative, stable products and services.
• Quality
    Deliver consistently superior performance and pursue every possible improvement. 
• Agility
    Identify emerging trends and act quickly to acquire new opportunities.
• Customer Satisfaction
    Anticipate customer needs and exceed their expectations.
• Warranty
Within 12 months since the customer used,or 18 months since shipped from factory, no matter which expires, we ensure that no defects for material and manufacturing.

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 1
Warranty: 1
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Angular
Samples:
US$ 3500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

How Do You Maintain a Gas Air Compressor?

Maintaining a gas air compressor is essential to ensure its optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, extends the compressor’s lifespan, and promotes efficient operation. Here are some key maintenance steps for a gas air compressor:

1. Read the Manual:

Before performing any maintenance tasks, thoroughly read the manufacturer’s manual specific to your gas air compressor model. The manual provides important instructions and guidelines for maintenance procedures, including recommended intervals and specific maintenance requirements.

2. Check and Change the Oil:

Gas air compressors typically require regular oil changes to maintain proper lubrication and prevent excessive wear. Check the oil level regularly and change it according to the manufacturer’s recommendations. Use the recommended grade of oil suitable for your compressor model.

3. Inspect and Replace Air Filters:

Inspect the air filters regularly and clean or replace them as needed. Air filters prevent dust, debris, and contaminants from entering the compressor’s internal components. Clogged or dirty filters can restrict airflow and reduce performance. Follow the manufacturer’s guidelines for filter cleaning or replacement.

4. Drain Moisture from the Tank:

Gas air compressors accumulate moisture in the compressed air, which can lead to corrosion and damage to the tank and internal components. Drain the moisture from the tank regularly to prevent excessive moisture buildup. Refer to the manual for instructions on how to properly drain the moisture.

5. Check and Tighten Connections:

Regularly inspect all connections, fittings, and hoses for any signs of leaks or loose connections. Tighten any loose fittings and repair or replace damaged hoses or connectors. Leaks can lead to reduced performance and inefficiency.

6. Inspect Belts and Pulleys:

If your gas air compressor has belts and pulleys, inspect them for wear, tension, and proper alignment. Replace any worn or damaged belts and ensure proper tension to maintain optimal performance.

7. Clean the Exterior and Cooling Fins:

Keep the exterior of the gas air compressor clean from dirt, dust, and debris. Use a soft cloth or brush to clean the surfaces. Additionally, clean the cooling fins regularly to remove any accumulated debris that can impede airflow and cause overheating.

8. Schedule Professional Servicing:

While regular maintenance can be performed by the user, it is also important to schedule professional servicing at recommended intervals. Professional technicians can perform thorough inspections, conduct more complex maintenance tasks, and identify any potential issues that may require attention.

9. Follow Safety Precautions:

When performing maintenance tasks on a gas air compressor, always follow safety precautions outlined in the manual. This may include wearing protective gear, disconnecting the power source, and ensuring proper ventilation in confined spaces.

By following these maintenance steps and adhering to the manufacturer’s guidelines, you can keep your gas air compressor in optimal condition, prolong its lifespan, and ensure safe and efficient operation.

air compressor

How Do You Transport Gas Air Compressors to Different Job Sites?

Transporting gas air compressors to different job sites requires careful planning and consideration of various factors. Here’s a detailed explanation:

1. Equipment Size and Weight:

The size and weight of the gas air compressor are crucial factors to consider when planning transportation. Gas air compressors come in different sizes and configurations, ranging from portable units to larger, skid-mounted or trailer-mounted compressors. Assess the dimensions and weight of the compressor to determine the appropriate transportation method.

2. Transportation Modes:

Gas air compressors can be transported using different modes of transportation, depending on their size, weight, and distance to the job site:

  • Truck or Trailer: Smaller gas air compressors can be loaded onto a truck bed or trailer for transportation. Ensure that the vehicle or trailer has the necessary capacity to accommodate the weight and dimensions of the compressor.
  • Flatbed or Lowboy Trailer: Larger gas compressors or skid-mounted units may require transportation on a flatbed or lowboy trailer. These trailers are designed to carry heavy equipment and provide stability during transportation.
  • Shipping Container: For long-distance transportation or international shipments, gas air compressors can be transported in shipping containers. The compressor must be properly secured and protected within the container to prevent any damage during transit.

3. Securing and Protection:

It is essential to secure the gas air compressor properly during transportation to prevent shifting or damage. Use appropriate tie-down straps, chains, or fasteners to secure the compressor to the transport vehicle or trailer. Protect the compressor from potential impacts, vibrations, and weather conditions by using suitable covers, padding, or weatherproof enclosures.

4. Permits and Regulations:

Depending on the size and weight of the gas air compressor, special permits or escorts may be required for transportation. Familiarize yourself with local, state, and federal regulations regarding oversize or overweight loads, and obtain the necessary permits to ensure compliance with transportation laws.

5. Route Planning:

Plan the transportation route carefully, considering factors such as road conditions, height and weight restrictions, bridges, tunnels, and any other potential obstacles. Identify alternative routes if needed, and communicate with transportation authorities or agencies to ensure a smooth and safe journey.

6. Equipment Inspection and Maintenance:

Prior to transportation, conduct a thorough inspection of the gas air compressor to ensure it is in proper working condition. Check for any leaks, damage, or loose components. Perform routine maintenance tasks, such as oil changes, filter replacements, and belt inspections, to minimize the risk of equipment failure during transportation.

In summary, transporting gas air compressors to different job sites requires considering factors such as equipment size and weight, choosing appropriate transportation modes, securing and protecting the compressor, obtaining necessary permits, planning the route, and conducting equipment inspection and maintenance. Careful planning and adherence to transportation regulations contribute to the safe and efficient transportation of gas air compressors.

air compressor

What Are the Advantages of Using a Gas Air Compressor Over an Electric One?

Using a gas air compressor offers several advantages over an electric air compressor. Gas-powered compressors provide unique benefits in terms of mobility, versatility, power, and convenience. Here’s a detailed explanation of the advantages of using a gas air compressor:

1. Portability and Mobility:

Gas air compressors are typically more portable and mobile compared to electric compressors. They often feature handles, wheels, or trailers, allowing for easy transportation to different locations. This portability is especially advantageous in situations where compressed air is needed at remote job sites, outdoor events, or areas without access to electricity. Gas air compressors can be easily moved and positioned where they are required.

2. Independence from Electricity:

One of the primary advantages of gas air compressors is their independence from electricity. They are powered by gas engines, which means they do not rely on a direct connection to the electrical grid. This makes them suitable for use in areas where electrical power is limited, unreliable, or unavailable. Gas air compressors offer a reliable source of compressed air even in remote locations or during power outages.

3. Versatility in Fuel Options:

Gas air compressors provide versatility in terms of fuel options. They can be powered by various types of combustible gases, including gasoline, diesel, natural gas, or propane. This flexibility allows users to choose the most readily available or cost-effective fuel source based on their specific requirements. It also makes gas compressors adaptable to different environments and fuel availability in various regions.

4. Higher Power Output:

Gas air compressors typically offer higher power output compared to electric compressors. Gas engines can generate more horsepower, allowing gas compressors to deliver greater air pressure and volume. This higher power output is beneficial when operating pneumatic tools or equipment that require a significant amount of compressed air, such as jackhammers, sandblasters, or heavy-duty impact wrenches.

5. Continuous Operation:

Gas air compressors can provide continuous operation without the need for frequent breaks or cooldown periods. Electric compressors may overheat with prolonged use, requiring intermittent rest periods to cool down. Gas compressors, on the other hand, can operate continuously for longer durations without the risk of overheating. This continuous operation capability is particularly advantageous in demanding applications or situations that require extended periods of compressed air usage.

6. Quick Startup and Response:

Gas air compressors offer quick startup and response times. They can be started instantly by simply pulling a cord or pressing a button, whereas electric compressors may require time to power up and reach optimal operating conditions. Gas compressors provide immediate access to compressed air, allowing for efficient and prompt task completion.

7. Durability and Resistance to Voltage Fluctuations:

Gas air compressors are generally more durable and resistant to voltage fluctuations compared to electric compressors. Electric compressors can be affected by voltage drops or surges, which may impact their performance or cause damage. Gas compressors, however, are less susceptible to voltage-related issues, making them reliable in environments where voltage fluctuations are common.

8. Lower Energy Costs:

Gas air compressors can offer lower energy costs compared to electric compressors, depending on the price of the fuel being used. Gasoline or diesel fuel, for example, may be more cost-effective than electricity in certain regions or applications. This cost advantage can result in significant savings over time, especially for high-demand compressed air operations.

Overall, the advantages of using a gas air compressor over an electric one include portability, independence from electricity, fuel versatility, higher power output, continuous operation capability, quick startup and response times, durability, resistance to voltage fluctuations, and potentially lower energy costs. These advantages make gas air compressors a preferred choice in various industries, remote locations, and applications where mobility, power, and reliability are crucial.

China Good quality 15kw 20 HP Industrial Belt Driven Screw Air Compressor   air compressor CHINAMFG freightChina Good quality 15kw 20 HP Industrial Belt Driven Screw Air Compressor   air compressor CHINAMFG freight
editor by CX 2024-05-17

Biogas compressor

As one of the biogas compressor manufacturers, suppliers, and exporters of mechanical products, We offer biogas compressor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of biogas compressor.

Recent Posts